|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xj-s] (Fwd) Valve Stem Seals
Bywater's response on the issue of Teflon valve stem seals: ------- Forwarded Message Follows ------- From: Roger Bywater <101351.1414@compuserve.com> I am not aware of any problem with excessive oil loss down the valve stems on the V12 so why does anyone want to make an issue of it? Perhaps you would like to tell me the answers to the following questions:- 1. Why would Teflon stem seals be expected to give any advantage? 2. Why would anyone think exhaust stem seals are necessary anyway? -- Kirbert | If anything is to be accomplished, | some rules must be broken. | - Palm's Postulate
|
|
Improve your Jag-lovers experience with the Mozilla FireFox Browser!
View the latest posts from our Forums via an RSS Feed! ©Jag-loversTM Ltd / JagWEBTM 1993 - 2024 All rights reserved. Jag-lovers is supported by JagWEBTM For Terms of Use and General Rules see our Disclaimer Use of the Jag-lovers logo or trademark name on sites other than Jag-lovers itself in a manner implying endorsement of commercial activities whatsoever is prohibited. Sections of this Web Site may publish members and visitors comments, opinion and photographs/images - Jag-lovers Ltd does not assume or have any responsibility or any liability for members comments or opinions, nor does it claim ownership or copyright of any material that belongs to the original poster including images. The word 'Jaguar' and the leaping cat device, whether used separately or in combination, are registered trademarks and are the property of Jaguar Cars, England. Some images may also be © Jaguar Cars. Mirroring or downloading of this site or the publication of material or any extracts therefrom in original or altered form from these pages onto other sites (including reproduction by any other Jaguar enthusiast sites) without express permission violates Jag-lovers Ltd copyright and is prohibited |