|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xj-s] Re: Using injected foam to seal up sides of radiator
John Himes wrote: >What I used to replace my foam was too purchase some 4" by 4' form intended to >insulate a window mounted A/C for your home. Squished this in the sides & cut >in 1/2 to place under & top of the radiator. Where do you buy this? Hardware store or A/C supply? I am definitely going to have to pull my radiator this weekend. Now that California is getting the 100 degree F heat, my car gets to the top of the N, (which had always been its high point) and keeps going from there. I am trying not to drive till the radiator gets done.
|
|
Improve your Jag-lovers experience with the Mozilla FireFox Browser!
View the latest posts from our Forums via an RSS Feed! ©Jag-loversTM Ltd / JagWEBTM 1993 - 2024 All rights reserved. Jag-lovers is supported by JagWEBTM For Terms of Use and General Rules see our Disclaimer Use of the Jag-lovers logo or trademark name on sites other than Jag-lovers itself in a manner implying endorsement of commercial activities whatsoever is prohibited. Sections of this Web Site may publish members and visitors comments, opinion and photographs/images - Jag-lovers Ltd does not assume or have any responsibility or any liability for members comments or opinions, nor does it claim ownership or copyright of any material that belongs to the original poster including images. The word 'Jaguar' and the leaping cat device, whether used separately or in combination, are registered trademarks and are the property of Jaguar Cars, England. Some images may also be © Jaguar Cars. Mirroring or downloading of this site or the publication of material or any extracts therefrom in original or altered form from these pages onto other sites (including reproduction by any other Jaguar enthusiast sites) without express permission violates Jag-lovers Ltd copyright and is prohibited |