[xj-s] Using injected foam to seal up sides of radiator

[XJS88Jag@aol.com]

One thought I had on those that have tried or suggested some of the "foam in a
can" type solutions to replace the foam on the sides of the radiator.  Won't
this create a problem if & when you need to remove the radiator for whatever
reason? (neding to cut out the radiator)  This could also create a mess for
the shop that services your radiator (getting it rodded) when they un-solder
the side tanks.

What I used to replace my foam was too purchase some 4" by 4' form intended to
insulate a window mounted A/C for your home.  Squished this in the sides & cut
in 1/2 to place under & top of the radiator.  So far so good (all of 1 day).

John Himes
88 XJ-S 114K Miles :-)

---

• Prev by Date: Re: [xj-s] Re-chroming of plastic trim
• Next by Date: [xj-s] Re: Using injected foam to seal up sides of radiator
• Prev by thread: Re: [xj-s] ? on radiator fan clutch, possible replacement for AUX fan & temp ...
• Next by thread: [xj-s] Re: Using injected foam to seal up sides of radiator
• Index(es):
  • Main
  • Thread