[xj-s] re-splicing of wire harness

[Juliansean@aol.com]

In a message dated 98-07-26 22:31:13 EDT, kyoung@usinternet.com writes:

<< As for the harness, after cutting most of the bundles apart, it appears to
 be in better shape than I thought, and so I will also be patching it instead
 of buying a new harness. >>

May I recommend a great product for this job? 
There are special solder connectors sold in good parts stores that solder the
wires and apply a heat shrink tube around the solder at the same time.  The
way it works is you just insert the stripped wires to the tube, apply heat and
the solder pellet inside melts, and the tue shrinks at the same time.  A thin,
sealed, solder connection.  I know these are great because my company invented
them (made by Raychem corporation).
Using these connectors you never have to worry about quality of connection, or
corrosion again.  Unfortunately they are a bit expensive, but what isn't on a
Jaguar?....:)
Julian Mullaney

---

• Prev by Date: Re: [xj-s] Re:Wiring harness - 90 XJ-S V-12 (long)
• Next by Date: Re: [xj-s] re-splicing of wire harness
• Prev by thread: Re: [xj-s] Re:Wiring harness - 90 XJ-S V-12 (long)
• Next by thread: Re: [xj-s] re-splicing of wire harness
• Index(es):
  • Main
  • Thread