How I built an E-Type
by Ulrich Pfeiffer
(click on pictures to enlarge)
I'm living in a place near Stuttgart in Germany and have been restoring cars as my
hobby for a number of years.
* It had to be a Jaguar E-Type Series 1 Roadster *
I found a manufacturer near Munich producing a three dimensional steeled
frame for Cobra Replicas. I liked the construction of the frame allowing to use any engine
and transmission of choice up to 400 HP according to the German TÜV. I was able to adapt
the frame in a way a fibre glass body made exactly from an original E-Type Series 1
Roadster fitted on it.
After 60 hours:
* It had to be a Chevy V-8 *
After having made quite some experiences with used parts and facing the
fact that used US parts are fairly hard to get in Germany I decided to go for a brand new
Chevy 350 HO (High Output) with the following performance data:
After 500 hours:
After the paint job is half way through. Bonnet, doors and boot lid
are still to follow. Complete electrical components and wiring have been attached and are
working. Seat mounts, fuel tank, door locks, exhaust system, oil coolers, radiator, three
windscreen wipers all installed. All chrome parts, lights, finishers and badges were
adapted before painting. The first cooling system in this picture had to be upgraded to a
custom made heavy-duty radiator. Also I changed the position for the air filter to a
cooler corner afterwards. Engine cables and tubes are not yet in final place. Some might
notice that those days 6*15 wheels had been mounted.
After 900 hours:
Shows the chassis from underneath with the flat aluminum floor,
chromed oil pan, manual transmission, two exhaust pipes, without cats yet.
After 1000 hours:
The interior finished with carpets, leather, insulating material,
rubber sealings, side windows and so on. Below the radio is the injection controlling unit
and a security key device.
After three years on the road I had to see the TÜV again and the examiner only faulted with the front license plate position. Meanwhile a new exception for F-40s and E-Types was released which allows adhesive plates. Looks much better this way but is still hard to get in my country.
If anybody is interested in more details please let me know.
Word and photos are copyright Ulrich
Improve your Jag-lovers experience with the Mozilla FireFox Browser!
View the latest posts from our Forums via an RSS Feed!
©Jag-loversTM Ltd / JagWEBTM 1993 - 2019
All rights reserved. Jag-lovers is supported by JagWEBTM
Use of the Jag-lovers logo or trademark name on sites other than Jag-lovers itself in a manner implying endorsement of commercial activities whatsoever is prohibited. Sections of this Web Site may publish members and visitors comments, opinion and photographs/images - Jag-lovers Ltd does not assume or have any responsibility or any liability for members comments or opinions, nor does it claim ownership or copyright of any material that belongs to the original poster including images. The word 'Jaguar' and the leaping cat device, whether used separately or in combination, are registered trademarks and are the property of Jaguar Cars, England. Some images may also be © Jaguar Cars. Mirroring or downloading of this site or the publication of material or any extracts therefrom in original or altered form from these pages onto other sites (including reproduction by any other Jaguar enthusiast sites) without express permission violates Jag-lovers Ltd copyright and is prohibited